Contact us Contact us Customer Area Customer Area

Metrology courses

Deltamu offers courses that are tailored to industry and laboratory needs, spanning every level from beginners to advanced. The courses are delivered by professionals with extensive field experience who are committed to pushing forward developments in metrology. Our goal: to help you master the key skills of the metrology function.
Datadock√© Training Organization N° 83630317663
This registration does not imply approval of the State
Metrology courses
Course programme
General metrology
Ref Training Duration Formula
MT01 Introduction to metrology 1 d Intra WebSession
MT02 Methods for optimising calibration intervals (FD X 07-014) and monitoring operations 2 d Intra WebSession
MT03 Learn how to meet MSA requirements 3 d Intra WebSession
Metrology - Field of Excellence
Ref Training Duration Formula
EX01 Improving the metrology department: strategy and tools 3 d Intra WebSession
EX02 Advanced course in evaluating measurement uncertainties 2 d Intra WebSession
EX03 Latest calibration definition taken from VIM 3: Use of M-CARE modelling software 2 d Intra WebSession
EX04 NF ISO/CEI Guide 98-4: Client and supplier risks 1 d Intra WebSession
Uncertainties
Ref Training Duration Formula
IN01 Introduction to evaluating uncertainties in measurements and tests 1 d Intra WebSession
IN02 Practical introduction to evaluating and exploiting measurement uncertainties 3 d Intra WebSession
IN03 Evaluating measurement uncertainties using indirect measurements 3 d Intra WebSession
IN04 Evaluating measurement uncertainties using the Monte Carlo method 1 d Intra WebSession
Statistics
Ref Training Duration Formula
ST01 Basic statistical tools used in measurement 1 d Intra WebSession
ST02 Using applied statistics to process experimental data, measurement uncertainties and tests 2 d Intra WebSession
ST03 Inter-laboratory comparisons and proficiency testing procedures based on NF ISO 5725 et NF ISO 13528 2 d Intra WebSession
Practical training
Ref Training Duration Formula
FP01 Practical introduction to calibration/verification techniques in the industrial sector 2 d Intra
FP02 Extra practical course component delivered via video-conference 2 h WebSession
FP03 Setting up the drift method with Optimu 2 d Intra WebSession
FP04 Setting up the OPPERET method 2 d Intra WebSession
FP05 E-LEARNING CYCLE METROLOGY AND BUSINESS RESUMPTION PLAN Let’s make a fresh start! 24 h WebSession
OPTIMU Software
Ref Training Duration Formula
FOP01 Measuring Instrument Management Module (MIM ) 7 h Intra Digital
FOP02 Calibration module 14 h Intra Digital
FOP03 Movements module 4 h Intra Digital
FOP04 Uncertainty module 4 h Intra Digital
FOP05 Statistics module 4 h Intra Digital
FOP06 Administrative Management module 7 h Intra WebSession
FOP07 Further Theory and Practice Module FD X07-014 14 h Intra WebSession
FOP08 Administration module 3 h Digital
FOP09 Monitoring module 4 h Intra Digital
FOP10 Optimu.net module 2 h Digital
Course team

The Deltamu instructors, experts with a passion for metrology

Deltamu stands apart from conventional training organizations: the instructors' extensive experience in the field means they can enhance course content with practical exercises, share their operational know-how and bring the role of the metrologist into strong focus: topics include how to set the service up, fundamentals of metrology in industry and laboratory settings, interpretation of calibration results, evaluation of measurement uncertainties, optimization of calibration intervals…and much more.

Christophe

Christophe

Training & Consultancy Manager

A metrology expert who has been with Deltamu since 2008, Christophe specializes in training and mentoring schemes for industry players: his brief is to provide pragmatic solutions to recurring challenges in the field of metrology.

Olivier

Olivier

Metrology Project Manager

Accustomed to working in every branch of industry, both on site and in calibration laboratories, Olivier has been responsible for managing and optimizing the entire measuring instrument base since 2010.

Peggy

Peggy

Data scientist, metrology instructor

An expert in academic research who has honed and applied her mathematical skills in various domains, Peggy joined the Deltamu team in 2018 helping to develop the company's training schemes and project studies.

Raynald

Raynald

Software & Support Manager

With a strong background as a laboratory quality manager and a metrology instructor, Raynald benefits our customers on a day-to-day basis with his dual expertise in metrology and Deltamu software.

Annarita

Annarita

Technical Director Italy

A PhD in metrology, statistics in industry and statistical process control coupled with experience as an Accredia technical inspector at the Calibration Department means that Annarita is able to operate in a wide range of industrial fields.

Jean-Michel POU

Jean-Michel POU

Founding President

A member of standards committees and a well-known lecturer, Jean-Michel POU has spent over 25 years developing the metrology function. Author of the book "Smart Metrology" published by AFNOR in 2016, he also developed the Master degree "Data Science for Engineering"

Alice

Alice

Instructor and software expert

Alice knows the software inside out, performs validation and qualification tests, and runs the hotline for OPTIMU users. An expert in the software's functional configuration, she also provides training in how to use the various OPTIMU modules.

Matthieu

Matthieu

Instructor and software expert

Matthieu has worked in a number of metrology laboratories and departments where he had the opportunity to use OPTIMU's business functionalities and appreciate its advantages. Proficient in MIM and Calibration modules, Matthieu shares his field experience with our customers.

Benjamin

Benjamin

Instructor and software expert

A qualified project management expert, Benjamin has already carried out many OPTIMU deployments in a wide range of situations, including 21CFRPart 11 in the pharmaceutical sector. Expert in the software's functional configuration, Benjamin performs validation operations, and, like Alice, runs the hotline and provides training in how to use the various OPTIMU modules.

Why choose Deltamu?

Programme customization
4 formats intra, inter, websession, digital
Practical applications and real-life case studies
Post-training follow-up guaranteed
Sessions on a human scale
90% Satisfied participants
Customer satisfaction
Metrology course 2017 2018 2019
Number of sessions 35 31 41
Number of hours 547,5 417,3 555,5
Participants 174 117 128
Overall satisfaction 91% 86% 8,3/10*
Facilitator satisfaction 90% 93%
OPTIMU course 2017 2018 2019
Number of sessions 55 68 77
Number of hours 659,5 964,8 1042,5
Participants 320 282 297
Overall satisfaction 92% 95% 9,1/10*
Facilitator satisfaction 97% 98%
* New customer satisfaction survey method coming out in 2019 as part of the QUALIOPI certification project
Modus Operandi

Boasting industry-wide involvement in all aspects of the metrology sector, Deltamu considers itself to be at the forefront of developments in the field. By adapting their course content to suit all levels from "beginner" to "advanced", Deltamu instructors ensure participants benefit from an efficient transfer of knowledge whatever their profile. Our strength lies in building a dedicated training programme tailored to your needs, that is systematically geared to helping each participant progress effectively.

There are a number of options
Intra

Intra-company courses

Intra-industry courses are reserved for participants from the same company at their premises or at Deltamu premises.

Course dates are decided jointly within 15 days of receiving the order.

Inter

Inter-company training

Deltamu organizes inter-company training sessions that group participants from various companies, either at its premises, or at premises rented by Deltamu. Course dates are set by Deltamu.

WebSession

Websession courses

Websession courses are delivered online, and are usually reserved for participants from the same company, limited to 2 or 3 participants per session

Course dates are decided jointly within 15 days of receiving the order.

Digital

Digital learning courses

Participants log on to a personalized platform tailored to their vocational background, where they can access practical exercises and regular coaching with their instructor.

Discover the Digital Academy

How to register for a Deltamu course?

Register online

via the contact form, also available on each programme

By phone 04 73 15 13 06

Monday to Thursday from 8:30 to 12:30, and 13:30 to 17:30, and Friday from 8:30 to 12:30 and from 13:30 to 16:30

Deltamu course and Handicap

Deltamu France is located in a newly constructed building (2013) and meets accessibility standards for people with reduced mobility (parking, lift, circulation inside the building and Deltamu France premises, WC). Trainees can contact the following organizations to find a host organization and/or work with Deltamu to adapt reception arrangements and the course programme:

This website uses Google Analytics. By continuing to navigate on this page, you authorise us to use cookies. Privacy policy
Deltamu 2020 | Privacy policy | Legal notices